Produse pentru ecoflux pro (11)

iglidur® J2 Environmentally friendly. The growing demand for PFOA-free iglidur® materials* is met by igus® with an ongoing review of all iglidur® materials – the list of already PFOA-free iglidur® materials is thus getting continuously longer – and a new iglidur® material: iglidur® J2. iglidur® J2 is available as cylindrical bearings and plain bearings with flange. Good mechanical properties, robust Low-priced Good resistance to media Lubricant- and mainteance-free

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Sicherheit, Zuverlässigkeit und Wartungsfreundlichkeit sind die wichtigsten Anforderungen an Beleuchtungssysteme bei Anwendungen in rauen und explosionsgefährdeten Umgebungen. Ideal ist eine Beleuchtung, die sich durch eine lange und wartungsfreie Nutzungsdauer, geringen Energieverbrauch, Widerstandsfähigkeit und eine hochwertige Lichtqualität auszeichnet. Die Protecta X LED erfüllt all diese Anforderungen. Daher kommt sie nicht mehr nur bei Anwendungen in der Öl- und Gas-Industrie, sondern zunehmend in Offshore-Windparks, z.B. auf HVDC-Konverter-Plattformen zum Einsatz. Leistung 16 W bis 38 W Lichtstrom 2.696 lm – 7.474 lm Farbtemperatur 5000 K (Kaltweiß, 4000 K optional lieferbar) Temperatur -40 °C / +60 °C und -25 °C / +60 °C = Emergency-Ausführung Gehäuse Aluminium in Marinequalität mit Polycarbonat-Diffusor Live Plug-and-Play-Battery-Stick Schutzart IP66 / IP67 Kennzeichnung Ex e mb q IIC T4 Gb, Ex tb IIIC T95 °C Db IP6X Einsetzbar in Zone 1 und Zone 21

EXOXE® is an innovative product containing over 6 billion microparticles of exosomes, the powerful extracellular vesicles. Exosomes promote skin rejuvenation and tissue revitalization, thanks to their penetrative properties, without the need for injections. EXOXE® represents an evolution beyond conventional exosome products, epitomizing utmost quality. SKU:EXOX-0000 Brand:EXOXE™ Concentration:Lyophilized Powder: Hydrolyzed Collagen (886,000PPM), Collagen (100,000PPM) Sodium Hyaluronate Indication:Treats dry, flabby, damaged skin Combats skin changes, acne scars, atrophic scars, stretch marks The Pack Includes:5 x 50mg Vial PURE EXO - Lyophilized Powder 5 x 5ml Vial Sterilized HA Solution Results' Duration:Results may last up to 12 months. The effect and duration of action is conditional Articles:What are Exosome Treatments? Manufacturer:Regenbogen Co., Ltd.

Enrobage des semences réduisant les pertes liées aux insectes et aux nuisibles du sol Destiné à l’enrobage des semences pour assurer des levées saines, vigoureuses et homogènes EVAFILM 200 a une action naturelles et réalisant une barrière naturelle . EVAFILM 200 est une gamme de produits à base d’extraits de plantes et d’huiles essentielles. – Huiles végétales – Extrait de plantes – Huiles essentielles Il est normé en Norme NFU Il s’utilise en agriculture biologique selon les réglements CE 834/2007 et 889/2008

SUPER NETTOYANT SOLS LISSES 97.8 des ingrédients d’origine naturelle Idéal nettoyages difficiles – Contact alimentaire Nettoyant sols très concentré, idéal pour le nettoyage difficile des sols cimentés, carrelés ou peints. Convient également pour le décapage d’émulsions autolustrantes. Application manuelle ou en autolaveuse. pH > 12. Formulation sur base végétale. 97,8% du total des ingrédients sont d’origine naturelle. Contact alimentaire (arrêté du 19/12/2013). Réf:I536 Conditionnement:Bidon de 5 L – Carton de 4

Spécifique pour les produits difficiles à démouler, par exemple riches en sucre et en protéine. Excellent pouvoir anti-adhérent. Viscosité :700 à 1100 mPa.s (25°C) Valeur d’iode:± 80 Point de fumée:230 °C POIDS SPECIFIQUE:920 kg/m3 (20°C) Formats disponibles:10L – GRV 1000L

Ce produit contient : 5 protections en polystyrène par paquet 5 carton de suremballage par paquet UGS:Euro-JERO

Liquid product based on lithium silicates, which was created for the protective, consolidating and porosity reducer treatment of concrete, mineral, brick and stone substrates. It guarantees optimal durability and adhesion strength, resistance to UV rays, chemical agents and mechanical stresses. The result of the application allows to obtain a rapid hardening of the surface as well as a revived and homogeneous appearance of the same. The product has a negligible environmental impact thanks to the low VOC content (<50 g / l) and is practically odorless. Protective, reinforcing, water repellent treatments of concrete, mineral and stone supports. Specific product for revitalizing, simultaneously providing a great consolidation and an annulment of the dust produced in concrete supports, interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest. The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam it's recommended. The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. Keep the substrate wet with Consilex Idrofix for at least 20 minutes during application. If applied on floors, wait 24 hours before passing on the treated support. The reinforcing contribution will be completed after 2-3 weeks of treatment. From 0,20 to 1,00 kg of Consilex Idrofix per square meter of surface to be treated, based on the porosity of the support.

An anti-dust chemical/mechanical revitalising hardener for concrete flooring and screeds, consisting of an aqueous solution of mineral silicates and fluosilicates, activated by specific wetting agents. It is applied in several coats of decreasing dilution in water, with a brush or mechanical “scrubber”. Specific anti-dust treatments for industrial flooring or concrete slabs that have lost their original “vitality”. It reacts with the calcium compounds, soluble and unstable, present in of concrete products, transforming them into new stable, insoluble and resistant compounds. Consequent increases in resistance to wear and tear of the order of 200% -400%, significant increases in chemical stability, resistance to freeze-thaw cycles etc. Reactive impregnations for stabilising chemical and mechanical structures and concrete products. Hardening, anti-dust, anti abrasive and anti-corrosion treatments for concrete floorings. Adjustment of the chemical and mechanical performance of products for the industrial, rural and livestock construction (on horizontal surfaces). Apply, preferably with a brush or with "washer dryer" machine on the basis of the following indications: - Porous surfaces: repeated applications of a solution of water and QL Fluosil at a ratio in 1:1 - Compact surfaces: apply three coats, with decreasing dilution with water. 1a coat 1:3, 2a coat 1:2, 3a coat 1:1. The consumption of QL Fluosil will be proportional to the absorption of the floor to be treated. Indicatively a porous surface will consume about 400 g/m², while a surface with normal porosity will consume 250-300 g/m². Leave the product to dry between one coat and the next and then, after the last coat, wash with copious amounts of water. Protect glass and aluminium surfaces during application. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".

iglidur® C500 Up to +250 °C, wear-resistant. iglidur® C500 can be used up to 250 °C, extremely media-resistant – including in cleaning processes with hydrogen peroxide – wear resistant, with low friction values. Also suited for a wide range of custom geometries or piston rings. High resistance to media and temperature Long-term service temperature +250°C Good coefficients of friction and wear Lubricant- and mainteance-free